The LOHER VARIO Ex d(e) series has a welded steel enclosure for the highest degree of variability and versatility. Flange rings at the ends of the enclosure increase the torsional stiffness and ensure a vibration-proof mechanical design. The steel version allows various bearing concepts, dimensions can be adapted and a wide range of instruments can be mounted.
The surface cooling using flat ribs combined with a defined inner cooling circuit with shaft-mounted fan inside the motor ensure optimum motor utilization. The copper bar rotors used as standard allow starting and operating parameters to be optimized for each and every application. With power ratings up to 3150 kW, these motors are mainly used for conveying, transporting and compressing. The rugged version allows safe, reliable and straightforward operation in Zone 1 both for line and converter operation.
|Models||DH.. / MLFB: 1PS4, 1PS5|
|Shaft heights||355, 400, 450, 500, 560, 630|
|Power range||80 kW - 3150 kW|
|Number of poles||2 - 16 poles, higher pole numbers on request|
|Voltage range||3000 V - 11000 V|
|Rated voltage||3.3 kV / 4.16 kV / 6 kV / 6.6 kV / 10 kV / 11 kV|
|Degree of protection||IP55, IP56, IP65, IP67, IP68|
|Cooling type||AIR - WATER|
|Type of construction||IM B3, IM B35, IM V1|
|Bearings||Roller bearings, sleeve bearings (only for gas group IIB)|
|Standards||IEC, EN, DIN, VDE|
|Explosion protection||II2G Ex d(e) IIB T4, II2G Ex d(e) IIC T4|